|
|
|
National Stock Number:
5940-01-085-3892
Federal Supply Class:
5940
National Item Identification Number:
010853892
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 40TB30 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-T-55164/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | BARRIER TYPE | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MATERIAL | PLASTIC DIALLYL PHTHALATE AND | | GLASS FIBER BOARD | | COPPER ALLOY TERMINALS | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19833 MIL SPEC ALL MATERIAL RESPONSES BOARD | | QQ-B-613,COMP 11 FED SPEC SINGLE MATERIAL RESPONSE TERMINALS | | SURFACE TREATMENT | SOLDER OR | | TIN TERMINALS | | BOARD OVERALL LENGTH | 11.907 INCHES | | BOARD OVERALL WIDTH | 0.875 INCHES | | BOARD OVERALL HEIGHT | 0.484 INCHES | | BOARD HEIGHT EXCLUDING TERMINALS | 0.484 INCHES | | BASE THICKNESS | 0.328 INCHES | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.375 INCHES | | TERMINAL DESIGN | FEEDTHRU | | FEEDTHRU CONNECTION END TYPE | 857 FIRST END SINGLE COMBINATION | | F6 SECOND END SINGLE COMBINATION | | FEEDTHRU TERMINAL QUANTITY | 2 SINGLE COMBINATION | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 11.641 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.312 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.281 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.141 INCHES | | MOUNTING HOLE DIAMETER | 0.160 INCHES | | CURRENT RATING IN AMPS | 7.5 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 | | TEST DATA DOCUMENT | 81349-MIL-T-55164 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-T-55164/4 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 40TB30 |
|
|