5950-01-373-7009, TRANSFORMER,RADIO FREQUENCY

National Stock Number:
5950-01-373-7009

Federal Supply Class:
5950

National Item Identification Number:
013737009

Description:
TRANSFORMER,RADIO FREQUENCY

Detail:
An item having either a single tapped winding (autotransformer type), or two or more windings designed to furnish inductive reactance and/or transfer electrical energy in circuits by means of a magnetic field. It is so designed that its entire intended range of operations is above 20 Kilohertz (Kilocycles). The minimum value may extend into the audio frequency range (below 20 Kilohertz). It may include integral capacitors, coils, resistors, and adjustable tuning cores. For items having only two active terminals see COIL, RADIO FREQUENCY. Includes types having windings which may be moved with respect to each other. Excludes TRANSFORMER, DISCRIMINATOR.

Manufacturer Information:

632908-02	07690	BAE SYSTEMS CONTROLS INC
ITP-1531-72	09969	VISHAY DALE ELECTRONICS, INC.

Techincal Specification:

BODY HEIGHT	0.780 INCHES NOMINAL
BODY OUTSIDE DIAMETER	1.200 INCHES NOMINAL
FREQUENCY RATING	98.0 KILOHERTZ MINIMUM AND 102.0 KILOHERTZ MAXIMUM SINGLE COMPONENT
INCLOSURE TYPE	FULLY INCLOSED
INDUCTANCE RATING	144.00 MICROHENRIES MINIMUM AND 169.00 MICROHENRIES MAXIMUM SINGLE COMPONENT FOURTH WINDING
INDUCTANCE RATING	20.00 MICROHENRIES MINIMUM AND 24.00 MICROHENRIES MAXIMUM SINGLE COMPONENT THIRD WINDING
INDUCTANCE RATING	64.00 MICROHENRIES MINIMUM AND 80.00 MICROHENRIES MAXIMUM SINGLE COMPONENT FIRST WINDING
INDUCTANCE RATING	64.00 MICROHENRIES MINIMUM AND 80.00 MICROHENRIES MAXIMUM SINGLE COMPONENT SECOND WINDING
INDUCTANCE RATING	68.00 MICROHENRIES MINIMUM AND 80.00 MICROHENRIES MAXIMUM SINGLE COMPONENT FIFTH WINDING
MOUNTING FACILITY QUANTITY	1 SINGLE GROUP
MOUNTING METHOD	THREADED HOLE(S) SINGLE GROUP
NOMINAL THREAD SIZE	0.112 INCHES SINGLE GROUP
RATING METHOD	ELECTRICAL SINGLE COMPONENT ALL WINDING
RELIABILITY INDICATOR	NOT ESTABLISHED
TERMINAL TYPE AND QUANTITY	10 PIN
TEST DATA DOCUMENT	07690-632908 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC) SINGLE GROUP
WINDING FUNCTION AND QUANTITY	2 PRIMARY AND 3 SECONDARY SINGLE COMPONENT

Click here to Register for Free 30-day Trial