|
|
|
National Stock Number:
5970-00-275-1896
Federal Supply Class:
5970
National Item Identification Number:
002751896
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| NAS549E1416 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| INSIDE DIAMETER | 0.890 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.495 INCHES MINIMUM AND 1.520 INCHES MAXIMUM | | OVERALL HEIGHT | 0.063 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-15035, TYPE FBE-CANCELLED/REPLACED BY MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-24768/13 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC PHENOLIC AND COTTON OVERALL | | SPECIFICATION/STANDARD DATA | 80205-NAS549 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | STYLE DESIGNATOR | ROUND, FLAT |
|
|