|
|
|
National Stock Number:
5970-01-074-8359
Federal Supply Class:
5970
National Item Identification Number:
010748359
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 3151784 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 350199 | 02769 | LOCKHEED MARTIN CORPORATION | | 350199 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| INSIDE DIAMETER | 0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | OVERALL HEIGHT | 0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM | | MATERIAL AND LOCATION | OVERALL PLASTIC, POLYAMIDE, L-P-410, COMP 6/10 | | SPECIAL FEATURES | MICRO INCH FINISH 125 | | STYLE DESIGNATOR | ROUND, FLAT |
|
|