|
|
|
National Stock Number:
5970-01-090-4615
Federal Supply Class:
5970
National Item Identification Number:
010904615
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 2510593-3 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| INSIDE DIAMETER | 0.255 INCHES MINIMUM AND 0.259 INCHES MAXIMUM | | MATERIAL AND LOCATION | OVERALL PLASTIC, EPOXY, MIL-P-18177, TYPE GEB-CANCELLED/REPLACED BY MIL-I-24768/3 | | OUTSIDE DIAMETER | 0.537 INCHES MINIMUM AND 0.541 INCHES MAXIMUM | | OVERALL HEIGHT | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND, FLAT |
|
|