|
|
|
National Stock Number:
5970-01-097-4167
Federal Supply Class:
5970
National Item Identification Number:
010974167
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 5621-9-31 | 86928 | SEASTROM MANUFACTURING CO INC |
|
Techincal Specification:
| INSIDE DIAMETER | 0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.245 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | OVERALL HEIGHT | 0.031 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-18177, TYPE GEE MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-I-24768/34 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC EPOXY AND FIBERGLASS OVERALL | | STYLE DESIGNATOR | ROUND, FLAT |
|
|