5985-01-368-5295, ATTENUATOR,VARIABLE

National Stock Number:
5985-01-368-5295

Federal Supply Class:
5985

National Item Identification Number:
013685295

Description:
ATTENUATOR,VARIABLE

Detail:
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Manufacturer Information:

A802MD

64537

CAES SYSTEMS LLC

Techincal Specification:

ADJUSTMENT DEVICE TYPE AND QUANTITY	1 SLOTTED SCREW
APPLICATION DESIGN	TRANSMISSION LINE
ATTENUATION VARIATION METHOD	CONTINUOUS
BODY STYLE	COAXIAL TYPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	2.100 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	0.840 INCHES NOMINAL
COAXIAL CONNECTOR SERIES DESIGNATION	SMA
FREQUENCY RANGE	2.000 GIGAHERTZ MINIMUM AND 4.000 GIGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS	50.0 INPUT-OUTPUT
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS	0.3
OVERALL ATTENUATION RANGE IN DECIBELS	+0.0 TO 20.0
OVERALL HEIGHT	2.450 INCHES NOMINAL
OVERALL LENGTH	2.700 INCHES NOMINAL
OVERALL WIDTH	0.530 INCHES NOMINAL
MOUNTING FACILITY PATTERN	FOUR POSITION RECTANGULAR
MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE(S)
POWER RATING	10.0 WATTS AVERAGE AND 5.0 KILOWATTS PEAK
UNTHREADED MOUNTING HOLE DIAMETER	0.156 INCHES NOMINAL
VOLTAGE STANDING WAVE RATIO	1.30
TERMINAL TYPE AND QUANTITY	2 CONNECTOR, COAXIAL, FEMALE

Click here to Register for Free 30-day Trial