| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -20.0 TO 20.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 7.00 CENTIMETER-GRAMS MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY STYLE | STANDARD ROUND B |
| BODY SIZE | 15 |
| COMPENSATION METHOD | WINDING COMPENSATED |
| FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.1320 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 2.5000 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 25.00 OUTPUT |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9500 INCHES MAXIMUM |
| SHOULDER DIAMETER | 1.3120 INCHES NOMINAL |
| PILOT DIAMETER | 0.8750 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 82.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 57.00 NOMINAL |
| SHAFT DIAMETER | 0.1850 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNEF SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.4680 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.1 NOMINAL |
| TRANSFORMATION RATIO | 0.450 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 580.00 NOMINAL |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 15.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 50.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 210.0 MILLIWATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |