| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| AFT OF FIRST FLANGE DIAMETER | 2.7490 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
| BODY DIAMETER | 2.7000 INCHES MAXIMUM |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 31 |
| BODY STYLE | STANDARD ROUND D |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| FLANGE DIAMETER | 3.0990 INCHES MINIMUM AND 3.1000 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| LENGTH | 0.6150 INCHES NOMINAL SHOULDER |
| PILOT LENGTH | 0.0300 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 6.500 INPUT TO OUTPUT MAXIMUM |
| PILOT DIAMETER | 0.2970 INCHES NOMINAL |
| MAXIMUM TEMP RISE | 18.0 CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 4.4063 INCHES NOMINAL |
| OVERALL LENGTH | 5.3550 INCHES NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 24.00 MAXIMUM |
| SECOND SHOULDER DIAMETER | 2.7490 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| SHAFT LENGTH | 0.6900 INCHES MINIMUM AND 0.7100 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT DIAMETER | 0.2403 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3640 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 2.6950 INCHES MINIMUM AND 2.7000 INCHES MAXIMUM |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 19.00 MAXIMUM |
| STATOR INPUT CURRENT RATING | 725.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 7.7 WATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 0.300 INCH-OUNCES MINIMUM |
| TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |
| ZRS IMPEDANCE ANGLE IN DEG | 27.00 MINIMUM |
| ZRS RESISTANCE IN OHMS | 44.00 MAXIMUM |