5999-01-084-0858 HEAT SINK,ELECTRICAL-ELECTRONIC Index 5970-01-084-0861 INSULATOR,PLATE

National Stock Number:
5999-01-084-0860

Federal Supply Class:
5999

National Item Identification Number:
010840860

Description:
MOUNTING PAD,ELECTRICAL-ELECTRON

Detail:
AN ITEM FABRICATED FROM ELECTRICALLY NONCONDUCTIVE MATERIAL SPECIFICALLY DESIGNED TO PROVIDE A SUPPORT FOR MOUNTING AN ELECTRICAL AND/OR AN ELECTRONIC COMPONENT SUCH AS A SEMICONDUCTOR DEVICE, RELAY, OR RESISTOR INTO THE NEXT HIGHER ASSEMBLY. IT ISOLATES THE COMPONENT FROM THE MOUNTING SURFACE OF THE NEXT HIGHER ASSEMBLY, IT MAY ACT AS A STRAIN RELIEF TO AVOID DAMAGE TO THE COMPONENT SEAL, AND IT MAY PERMIT SOLDERING OF THE COMPONENT TO THE NEXT HIGHER ASSEMBLY WITHOUT DAMAGE. IT INCLUDES HOLES, NOTCHES, OR OTHER PROVISIONS FOR PHYSICAL ALIGNMENT AND SPACING OF ELECTRICAL LEADS AND/OR OTHER MOUNTING FACILITIES PROJECTING FROM THE COMPONENT IT MOUNTS. IT MAY ALSO AFFORD PROTECTION FROM SHOCK OR VIBRATION. IT MAY BE EITHER NONTHERMALLY CONDUCTIVE WHICH PROTECTS THE COMPONENT FROM TEMPERATURE CHANGES IN THE NEXT HIGHER ASSEMBLY OR IT MAY BE THERMALLY CONDUCTIVE WHICH PERMITS HEAT GENERATED IN THE COMPONENT TO BE DRAINED OUT TO A HEAT SINK. FOR ITEMS WHOSE FUNCTION IS ELECTRICAL INSULATION ONLY, SEE INSULATOR, (AS MODIFIED). EXCLUDES HOLDER, (AS MODIFIED); RETAINER, (AS MODIFIED), AND SPACER, PLATE.


Manufacturer Information:
10335DAP07047ROSS MILTON CO THE
36000239-00104939LOCKHEED MARTIN CORPORATION
A-55485/05-001D58536FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
A-A-55485/558536FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
M38527/05-001D81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
538622-8496214RAYTHEON COMPANY
M38527/5-01D81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-M-38527/581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALPLASTIC DIALLYL PHTHALATE
MOUNTING FACILITY TYPE AND QUANTITY1 UNTHREADED HOLE FOURTH MOUNTING FACILITY
MOUNTING FACILITY TYPE AND QUANTITY10 UNTHREADED HOLE FIRST MOUNTING FACILITY
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE THIRD MOUNTING FACILITY
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE SECOND MOUNTING FACILITY
OVERALL HEIGHT0.120 INCHES NOMINAL
OVERALL LENGTH0.370 INCHES NOMINAL
OVERALL WIDTH0.370 INCHES NOMINAL
SPECIFICATION/STANDARD DATA58536-A-A-55485/5 GOVERNMENT SPECIFICATION
TEST DATA DOCUMENT58536-A-A-55485 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER0.145 INCHES NOMINAL FOURTH MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.025 INCHES NOMINAL FIRST MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.055 INCHES NOMINAL SECOND MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.065 INCHES NOMINAL THIRD MOUNTING FACILITY


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us