|
|
|
National Stock Number:
5999-01-090-3805
Federal Supply Class:
5999
National Item Identification Number:
010903805
Description:
MOUNTING PAD,ELECTRICAL-ELECTRON
Detail:
AN ITEM FABRICATED FROM ELECTRICALLY NONCONDUCTIVE MATERIAL SPECIFICALLY DESIGNED TO PROVIDE A SUPPORT FOR MOUNTING AN ELECTRICAL AND/OR AN ELECTRONIC COMPONENT SUCH AS A SEMICONDUCTOR DEVICE, RELAY, OR RESISTOR INTO THE NEXT HIGHER ASSEMBLY. IT ISOLATES THE COMPONENT FROM THE MOUNTING SURFACE OF THE NEXT HIGHER ASSEMBLY, IT MAY ACT AS A STRAIN RELIEF TO AVOID DAMAGE TO THE COMPONENT SEAL, AND IT MAY PERMIT SOLDERING OF THE COMPONENT TO THE NEXT HIGHER ASSEMBLY WITHOUT DAMAGE. IT INCLUDES HOLES, NOTCHES, OR OTHER PROVISIONS FOR PHYSICAL ALIGNMENT AND SPACING OF ELECTRICAL LEADS AND/OR OTHER MOUNTING FACILITIES PROJECTING FROM THE COMPONENT IT MOUNTS. IT MAY ALSO AFFORD PROTECTION FROM SHOCK OR VIBRATION. IT MAY BE EITHER NONTHERMALLY CONDUCTIVE WHICH PROTECTS THE COMPONENT FROM TEMPERATURE CHANGES IN THE NEXT HIGHER ASSEMBLY OR IT MAY BE THERMALLY CONDUCTIVE WHICH PERMITS HEAT GENERATED IN THE COMPONENT TO BE DRAINED OUT TO A HEAT SINK. FOR ITEMS WHOSE FUNCTION IS ELECTRICAL INSULATION ONLY, SEE INSULATOR, (AS MODIFIED). EXCLUDES HOLDER, (AS MODIFIED); RETAINER, (AS MODIFIED), AND SPACER, PLATE.
|
Manufacturer Information:
| 23141 | 30377 | SMITHS AEROSPACE INC. ELECTRONIC SYSTEMS-GRAND RAPIDS | | 3249619 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 7717-245-N | 13103 | THERMALLOY CO INC | | 7717-245-N | C7407 | IV-ELECTRONIC KLAUS VESPERMANN KG |
|
Techincal Specification:
| ACCOMMODATED DEVICE MOUNTING HOLE PATTERN STYLE | EIGHT HOLE - 0.300 INCH | | ACCOMMODATED DEVICE MOUNTING HOLE QUANTITY | 8 | | BODY STYLE | RECTANGULAR | | COLOR | NATURAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-20693,TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC POLYAMIDE (NYLON) | | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE SINGLE MOUNTING FACILITY | | OVERALL HEIGHT | 0.178 INCHES NOMINAL | | OVERALL LENGTH | 0.300 INCHES NOMINAL | | OVERALL WIDTH | 0.300 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 10001-3249619 MANUFACTURERS SPECIFICATION CONTROL | | UNTHREADED MOUNTING HOLE DIAMETER | 0.020 INCHES MINIMUM AND 0.028 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
|
|