5999-01-102-1227, DELAY LINE

5963-01-102-1228 OSCILLATOR,NONCRYSTAL CONTROLLED

National Stock Number:
5999-01-102-1227

Federal Supply Class:
5999

National Item Identification Number:
011021227

Description:
DELAY LINE

Detail:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.

Manufacturer Information:

6091194-1	03640	LOCKHEED MARTIN CORPORATION
6091194-1	52088	LOCKHEED MARTIN CORPORATION
62-24	00222	ESC CONTROL ELECTRONICS LLC DBA CONTROL ELECTRONICS DIVISION OF FIL-COIL

Techincal Specification:

SIGNAL DELAY METHOD	INDUCTANCE
DELAY TIME VARIATION METHOD	TAPPED
INDIVIDUAL SECTION QUANTITY	1
SECTION DELAY TIME	330.960 MICROSECONDS NOMINAL SINGLE SECTION
SEGMENT QUANTITY PER SECTION	10 SINGLE SECTION
SEGMENT DELAY TIME	0.000 MICROSECONDS NOMINAL SINGLE SECTION 1ST SEGMENT
	0.000 MICROSECONDS NOMINAL SINGLE SECTION 2ND SEGMENT
	9.430 MICROSECONDS NOMINAL SINGLE SECTION 3RD SEGMENT
	28.580 MICROSECONDS NOMINAL SINGLE SECTION 4TH SEGMENT
	56.810 MICROSECONDS NOMINAL SINGLE SECTION 5TH SEGMENT
	94.440 MICROSECONDS NOMINAL SINGLE SECTION 6TH SEGMENT
	140.800 MICROSECONDS NOMINAL SINGLE SECTION 7TH SEGMENT
	196.130 MICROSECONDS NOMINAL SINGLE SECTION 8TH SEGMENT
	257.600 MICROSECONDS NOMINAL SINGLE SECTION 9TH SEGMENT
	330.960 MICROSECONDS NOMINAL SINGLE SECTION 10TH SEGMENT
OPERATING TEMP RANGE	0.0 TO 85.0 DEG CELSIUS
INPUT IMPEDANCE RATING	20.000 KILOHMS
OUTPUT IMPEDANCE RATING	600.000 OHMS
ATTENUATION IN DECIBELS	0.100
FREQUENCY RATING	0.500 KILOHERTZ MINIMUM AND
	8.000 KILOHERTZ MAXIMUM
BODY STYLE	RECTANGULAR, FRONT CONNECTION
OVERALL DEPTH	3.000 INCHES MAXIMUM
BODY LENGTH	10.500 INCHES MAXIMUM
BODY WIDTH	2.500 INCHES MAXIMUM
BODY DEPTH	2.500 INCHES MAXIMUM
MATERIAL AND LOCATION	STEEL CASE
	STEEL TERMINAL
SURFACE TREATMENT AND LOCATION	ENAMEL, MIL-E-15090 CASE
TERMINAL TYPE AND QUANTITY	20 WIRE HOOK
MOUNTING FACILITY	THREADED STUD
MOUNTING FACILITY QUANTITY	6
STUD LENGTH	0.494 INCHES MINIMUM AND
	0.506 INCHES MAXIMUM
THREAD SIZE AND SERIES/TYPE DESIGNATOR	0.190-32 UNF
THREAD CLASS	2A
THREAD PITCH DIAMETERS	0.1658 TO 0.1688 INCHES
THE MANUFACTURERS DATA
MANUFACTURERS CODE	52088
DESIGN CONTROL REFERENCE	6091194-1

Click here to Register for Free 30-day Trial