|
|
|
National Stock Number:
6105-01-091-9984
Federal Supply Class:
6105
National Item Identification Number:
010919984
Description:
MOTOR,CONTROL
Detail:
A MOTOR WHICH IS DESIGNED TO BE OPERATED FROM TWO INDEPENDENT VOLTAGE SOURCES, IN SUCH A WAY THAT VARIATIONS IN ONE VOLTAGE SOURCE WILL DETERMINE THE DIRECTION AND SPEED OF THE MOTOR. IN THE ALTERNATING CURRENT TYPE THE VOLTAGES ARE USUALLY APPLIED TO A SPLIT-PHASE STATOR, WHEREAS IN THE DIRECT CURRENT TYPE, ONE VOLTAGE IS APPLIED TO THE STATOR AND THE OTHER TO THE ARMATURE. LOW INERTIA AND RAPID REVERSIBILITY ARE INHERENT CHARACTERISTICS OF THIS TYPE OF MOTOR. SEE ALSO SERVOMOTOR, AUTOMATIC PILOT.
|
Manufacturer Information:
| 1937D-150-062 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC |
|
Techincal Specification:
| OVERALL LENGTH | 2.350 INCHES | | OVERALL WIDTH | 2.060 INCHES | | LENGTH OF SHAFT FROM HOUSING | 0.750 INCHES SINGLE END | | INCLOSURE FEATURE | GENERAL PURPOSE | | CURRENT TYPE | DC INPUT | | CURRENT RATING IN AMPS | 1.000 SINGLE INPUT | | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 28.0 LINE TO NEUTRAL SINGLE INPUT | | TORQUE RATING AND TYPE | 50.0 INCH-OUNCES RUNNING | | TEMP RATING | 105.0 OPERATING DEG CELSIUS | | TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD | | ROTOR SPEED RATING IN RPM | 1203.0 LOW NO LOAD AND | | 1471.0 HIGH NO LOAD | | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END | | SHAFT DIAMETER | 0.3120 INCHES NOMINAL SINGLE END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 10112 | | DESIGN CONTROL REFERENCE | 1937D-150-062 |
|
|