| INSTALLATION DESIGN | PANEL |
| INDICATOR TYPE | DIAL W/POINTER |
| MEASUREMENT RANGE | 0.0 TO 200.0 MICROAMPERES, DC SINGLE INDICATOR SINGLE RANGE |
| ACCURACY IN PERCENT | -1.0 TO 1.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
| SCALE GRADUATION TYPE | LINEAR SINGLE INDICATOR SINGLE RANGE |
| SCALE DIVISION QUANTITY | 40 SINGLE INDICATOR SINGLE RANGE |
| POINTER COLOR | RED SINGLE INDICATOR SINGLE RANGE |
| DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
| BACKGROUND COLOR | WHITE SINGLE INDICATOR SINGLE RANGE |
| MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 THREADED STUD |
| SCALE SELECTION METHOD | TERMINAL |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1500.0 |
| CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| STYLE DESIGNATOR | RECTANGULAR FLUSH MTG |
| METER BODY HEIGHT BEHIND MOUNTING FLANGE | 5.435 INCHES NOMINAL |
| METER BODY WIDTH BEHIND MOUNTING FLANGE | 1.225 INCHES NOMINAL |
| METER DEPTH BEHIND MOUNTING FLANGE | 5.760 INCHES NOMINAL |
| OVERALL HEIGHT | 6.690 INCHES NOMINAL |
| OVERALL LENGTH | 7.496 INCHES NOMINAL |
| OVERALL WIDTH | 1.520 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL |
| MOUNTING ARRANGEMENT STYLE | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 6.050 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.725 INCHES NOMINAL |
| PANEL FOR WHICH DESIGNED | NONMAGNETIC |
| CIRCUIT CONSTRUCTION TYPE | NONELECTRONIC |
| SURFACE TREATMENT | PAINT |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| ENVIRONMENTAL PROTECTION | DUSTPROOF |
| FURNISHED ITEMS AND QUANTITY | NUTS 6,LOOSE WASHERS 4; MACHINE SCREWS 4,SPLIT-RING LOCKWASHERS 4 |
| SPECIAL MARKINGS | POSITIVE SHALL BE MARKED ON REAR UPPER TERMINAL OF AMMETER; THERE SHALL BE A IDENTIFICATION PLATE WITH A MARKED QUANTITY MEASURED BY THE AMMETER |
| FEATURES PROVIDED | ZERO ADJUSTER AND |
| SELF-ILLUMINATION FACILITY |
| SPECIAL FEATURES | INDICATOR POINTER IS RED IN COLOR |
| TEST DATA DOCUMENT | 81349-MIL-S-901 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND |
| 96906-MIL-STD-108 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND |
| 96906-MIL-STD-167 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND |
| 23905-70000P06901-77 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |