| ACCURACY IN PERCENT | -1.0 TO 1.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES |
| BACKGROUND COLOR | WHITE SINGLE INDICATOR ALL RANGES |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 THREADED STUD |
| CIRCUIT CURRENT FOR WHICH DESIGNED | AC OR DC |
| DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR ALL RANGES |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 |
| FURNISHED ITEMS AND QUANTITY | MTG HDW 3; TERM. HDW 2 |
| ENVIRONMENTAL PROTECTION | COLD RESISTANT AND HEAT RESISTANT AND SHOCK RESISTANT AND SUBMERSIBLE AND VIBRATION RESISTANT AND WATERTIGHT |
| FEATURES PROVIDED | LUMINOUS SCALE MARKING AND MAGNETIC SHIELD AND ZERO ADJUSTER |
| FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |
| INDICATOR TYPE | DIAL W/POINTER |
| INSTALLATION DESIGN | PANEL |
| OVERALL DIAMETER | 3.510 INCHES MAXIMUM |
| OVERALL LENGTH | 2.850 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING |
| MEASUREMENT RANGE | +0.0 TO 10.0 DECIBELS ABOVE OR BELOW ONE MILLIWATT SINGLE INDICATOR 1ST RANGE |
| MEASUREMENT RANGE | +0.0 TO 10.0 WATTS SINGLE INDICATOR 2ND RANGE |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 2.800 INCHES MAXIMUM |
| METER DEPTH BEHIND MOUNTING FLANGE | 1.660 INCHES MAXIMUM |
| MOUNTING ARRANGEMENT STYLE | THREE HOLE/STUD BOLT CIRCLE |
| MOUNTING BOLT CIRCLE DIAMETER | 3.160 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 SCREW AND 3 UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.150 INCHES NOMINAL |
| MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| POINTER COLOR | BLACK SINGLE INDICATOR ALL RANGES |
| POWER SOURCE | EXTERNAL |
| SCALE DIVISION QUANTITY | 100 SINGLE INDICATOR 2ND RANGE |
| SCALE GRADUATION TYPE | LINEAR SINGLE INDICATOR 2ND RANGE |
| SCALE GRADUATION TYPE | NONLINEAR SINGLE INDICATOR 1ST RANGE |
| SPECIAL TEST FEATURES | CONFORMS TO MIL-M-10304/22C |
| SPECIAL FEATURES | RUGGEDIZED |
| STYLE DESIGNATOR | ROUND FLUSH MTG |
| SUPPLEMENTARY FEATURES | TERMINAL TO TERMINAL RESISTANCE SHALL BE WITHIN THE LIMITS OF 40 AND 500 OHMS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL SEMIGLOSS |