| CASING MATERIAL | PLASTIC REINFORCED W/STEEL WIRE |
| CASING SURFACE TREATMENT | ANY ACCEPTABLE |
| CASING LENGTH BETWEEN FERRULES | 102.616 INCHES MINIMUM AND |
| 103.324 INCHES MAXIMUM |
| CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND |
| 0.500 INCHES MAXIMUM |
| CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER |
| END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| THREAD LOCATION | INTERNAL BOTH ENDS |
| SCREW THREAD SERIES DESIGNATOR | UNS FIRST END |
| UNF SECOND END |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| THREAD CLASS | 2B BOTH ENDS |
| THREAD LENGTH | 0.375 INCHES NOMINAL BOTH ENDS |
| OVERALL END SIZE | 1.000 IN. HEX BY 0.609 IN. H |
| 0.750 IN. HEX BY 0.562 IN. H |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END |
| 0.750 INCHES NOMINAL SECOND END |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | ANY ACCEPTABLE |
| CORE SURFACE TREATMENT | ANY ACCEPTABLE |
| CORE OVERALL LENGTH | 108.625 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE |
| END TYPE | ROUND KEYED FIRST END |
| SQUARE MALE SECOND END |
| TIP LENGTH | 0.750 INCHES NOMINAL FIRST END |
| 0.375 INCHES NOMINAL SECOND END |
| CROSS SECTION SIZE AND LOCATION | 0.150 INCHES NOMINAL DIAMETER FIRST END |
| 0.104 INCHES NOMINAL ACROSS FLATS SECOND END |
| CORE REMOVABILITY | REMOVABLE |
| OVERALL LENGTH | 108.625 INCHES NOMINAL |
| NONDEFINITIVE SPEC/STD DATA | 9 CLASS AND |
| 1 TYPE |
| SPEC/STD CONTROLLING DATA | |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-10215 |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M10215-1B114 |