9390-00-810-5344, NONMETALLIC CHANNEL

5905-00-810-5354 RESISTOR,FIXED,WIRE WOUND

National Stock Number:
9390-00-810-5344

Federal Supply Class:
9390

National Item Identification Number:
008105344

Description:
NONMETALLIC CHANNEL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM NONMETALLIC MATERIAL(S) HAVING TWO VERTICAL FLANGES THAT EXTEND IN THE SAME DIRECTION FROM EACH END OF A HORIZONTAL BASE. THE VERTICAL FLANGES MAY HAVE VARIOUS TYPE TIPS AND ADDITIONAL FLANGES WHICH EXTEND ON THE SAME PLANE AS THE BASE. IT MAY HAVE A REINFORCING AGENT(S) AND BACKING EXCLUDES SEAL, NONMETALLIC CHANNEL.

Manufacturer Information:

AMS 3240	0U583	SAE INTERNATIONAL
AMS 3240	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS5364	71643	SAINT-GOBAIN PERFORMANCE PLASTICS INC. DBA SAINT GOBAIN PERFORMANCE PLASTICS INC.
LS5364	98897	LOCKHEED MARTIN CORP

Techincal Specification:

BASE FLANGE THICKNESS	0.180 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE	OPEN CHANNEL
ENVIRONMENTAL PROTECTION	CORROSION AND OIL RESISTANT AND TEAR AND LOW TEMPERATURE AND HEAT DRY AND WEATHER RESISTANT
FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE	0.090 INCHES NOMINAL
FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE	0.090 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS	0.180 INCHES NOMINAL
LEFT SIDE FLANGE TOP INNER RADIUS	0.030 INCHES NOMINAL
LEFT SIDE FLANGE TOP OUTER RADIUS	0.030 INCHES NOMINAL
LEFT-SIDE FLANGE TIP STYLE	LEFT W/INSIDE AND OUTSIDE CORNER RADII
LENGTH	120.000 INCHES NOMINAL
OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE	0.250 INCHES NOMINAL
OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE	0.030 INCHES NOMINAL
OVERALL HEIGHT	0.680 INCHES NOMINAL
OVERALL WIDTH	1.300 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3240 NATIONAL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	RUBBER CHLOROPRENE
MINIMUM TENSILE STRENGTH	900 POUNDS PER SQUARE INCH
NONMETALLIC HARDNESS RATING	35.0 MINIMUM SHORE DUROMETER A AND 45.0 MAXIMUM SHORE DUROMETER A
RIGHT SIDE FLANGE HEIGHT	0.500 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.120 INCHES NOMINAL
RIGHT SIDE FLANGE TOP INNER RADIUS	0.030 INCHES NOMINAL
RIGHT SIDE FLANGE TOP OUTER RADIUS	0.030 INCHES NOMINAL
RIGHT-SIDE FLANGE TIP STYLE	RIGHT W/INSIDE AND OUTSIDE CORNER RADII
SPECIFICATION/STANDARD DATA	81343-AMS 3240 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TEMP RATING	-40.0 CELSIUS AND 100.0 CELSIUS

Click here to Register for Free 30-day Trial