5355-00-882-6403 KNOB Index 5865-00-882-6406 CONTROL UNIT,FREQUENCY

National Stock Number:
9540-00-882-6405

Federal Supply Class:
9540

National Item Identification Number:
008826405

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
AMS-QQ-A-200/110U583SAE INTERNATIONAL
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
S1816224S18355THE BOEING COMPANY
QQ-A-200/1181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
S1816224S88277THE BOEING COMPANY


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FIRST TIP INNER RADIUS0.030 INCHES NOMINAL
FIRST TIP OUTER RADIUS0.030 INCHES NOMINAL
FIRST TIP STYLESQUARE W/ INNER AND OUTER CORNER RADII
HEAT TREATMENTO-ANNEALED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.375 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.070 INCHES NOMINAL
LEFT TOP INSIDE ANGLE87.0 DEGREES NOMINAL
LEG THICKNESS0.125 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATAO TEMPER
OVERALL HEIGHT1.997 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE93.0 DEGREES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.375 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.070 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH2.750 INCHES NOMINAL
WEIGHT PER UNIT MEASURE0.520 POUNDS PER LINEAR FOOT


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us