9540-00-905-3686, BEAM,STRUCTURAL

National Stock Number:
9540-00-905-3686

Federal Supply Class:
9540

National Item Identification Number:
009053686

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

1M7360	76301	THE BOEING COMPANY
52599	27610	INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
81786	01634	ALUMINUM CO OF AMERICA
AMS-QQ-A-200/13	0U583	SAE INTERNATIONAL
60-1568	29321	TRANSTAR METALS CORP
AMS-QQ-A-200/13	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
PA20572	06012	TRANSTAR METALS CORP
QQ-A-200/13	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
QQ-A-250/11	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP STYLE	SQUARE END
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.034 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.062 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	82.0 DEGREES NOMINAL
LEG THICKNESS	0.062 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT	3.630 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/13 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7178
NONDEFINITIVE SPEC/STD DATA	T6 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.066 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.062 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	98.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
TOP FLANGE WIDTH	2.100 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	0.440 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP

Click here to Register for Free 30-day Trial