8105-01-086-5053 BAG,PLASTIC Index 9540-01-086-5056 BEAM,STRUCTURAL

National Stock Number:
9540-01-086-5055

Federal Supply Class:
9540

National Item Identification Number:
010865055

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
11013-A55088PIMALCO INC. DIV ALCOA INC GLOBAL HARD ALLOY EXTRUSIONS
AMS-QQ-A-200/30U583SAE INTERNATIONAL
AMS-QQ-A-200/381343SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/381348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
K42A36O81755LOCKHEED MARTIN CORPORATION
MS14375E13596906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FIRST TIP STYLESQUARE END
HEAT TREATMENTO-ANNEALED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.750 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.100 INCHES NOMINAL
LEFT TOP INSIDE ANGLE104.0 DEGREES NOMINAL
LEG THICKNESS0.100 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATAO TEMPER
OVERALL HEIGHT2.324 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE76.0 DEGREES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES2.050 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.100 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
SPECIFICATION/STANDARD DATA81755-K42 MANUFACTURERS STANDARD
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH3.800 INCHES NOMINAL
WEIGHT PER UNIT MEASURE0.624 POUNDS PER LINEAR FOOT


Click here to Register for Free 30-day Trial