9540-01-093-9730 BEAM,STRUCTURAL Index 5805-01-093-9733 SPLICING KIT,TELEPHONE CABLE

National Stock Number:
9540-01-093-9731

Federal Supply Class:
9540

National Item Identification Number:
010939731

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
2684601634ALUMINUM CO OF AMERICA
60-1663229321TRANSTAR METALS CORP
PA622206012TRANSTAR METALS CORP
AMS-QQ-A-200/110U583SAE INTERNATIONAL
CVC10010-99CA80378TRIUMPH AEROSTRUCTURES, LLC
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/1181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLET SHAPET SHAPE
FABRICATION METHODEXTRUDEDEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.188 INCHES NOMINAL0.188 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.188 INCHES NOMINAL0.188 INCHES NOMINAL
FIRST TIP STYLESQUARE ENDSQUARE END
HEAT TREATMENTO-ANNEALEDO-ANNEALED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.370 INCHES NOMINAL0.370 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.248 INCHES NOMINAL0.248 INCHES NOMINAL
LEFT TOP INSIDE ANGLE110.0 DEGREES NOMINAL110.0 DEGREES NOMINAL
LEG THICKNESS0.060 INCHES NOMINAL0.060 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM12.000 FEET MAXIMUM
OVERALL HEIGHT2.650 INCHES NOMINAL2.650 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSEAMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATAO TEMPERO TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES2.400 INCHES NOMINAL2.400 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.248 INCHES NOMINAL0.248 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE70.0 DEGREES NOMINAL70.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICALIDENTICAL
TOP FLANGE WIDTH2.870 INCHES NOMINAL2.870 INCHES NOMINAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIPIDENTICAL W/FIRST TIP


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us