|
|
|
National Stock Number:
3040-01-083-8354
Federal Supply Class:
3040
National Item Identification Number:
010838354
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 015480 | 45436 | PILKINGTON OPTRNICS INCRPRTION | | 015480 | K6111 | QIOPTIQ LIMITED |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1230 INCHES MINIMUM AND 0.1270 INCHES MAXIMUM | | FIRST END FLAT LENGTH | 0.0930 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM | | FIRST END STYLE | FLATTED | | LARGEST STEP DIAMETER | 0.415 INCHES MINIMUM AND 0.425 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 1.800 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.1735 INCHES MINIMUM AND 0.1765 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM | | SECOND END DIAMETER | 0.1871 INCHES MINIMUM AND 0.1876 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.060 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | CHAMFERED ENDS 45.0 DEG AT 0.015 IN. D | | STEP QUANTITY | 3 |
|
|