|
|
|
National Stock Number:
3040-01-083-8355
Federal Supply Class:
3040
National Item Identification Number:
010838355
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 015472 | 45436 | PILKINGTON OPTRNICS INCRPRTION | | 015472 | K6111 | QIOPTIQ LIMITED |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1241 INCHES MINIMUM AND 0.1246 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | PRISM AND FILTER MECHANISM,P/N 019708,1270010800263 | | LARGEST STEP DIAMETER | 0.300 INCHES NOMINAL | | MATERIAL | STEEL | | OVERALL LENGTH | 1.400 INCHES NOMINAL | | SECOND END FLAT DEPTH | 0.0241 INCHES MINIMUM AND 0.0246 INCHES MAXIMUM | | SECOND END FLAT LENGTH | 0.185 INCHES NOMINAL | | SECOND END DIAMETER | 0.1241 INCHES MINIMUM AND 0.1246 INCHES MAXIMUM | | SECOND END STYLE | FLATTED | | SPECIAL FEATURES | ENDS CHAMFERED 45.0 DEG AT 0.015 IN. D | | STEP QUANTITY | 4 |
|
|